Access control certificate software · BS EN 60839-11-1
Access control certificate software for BS EN 60839-11-1, door by door.
Door registers with reader, lock and release checks, fail-safe and fail-secure behaviour confirmed, and a commissioning record the client signs on screen.
Certificate types: Design · Installation · Commissioning · Periodic Inspection & Servicing
On the certificate
What the access control certificate records
Every door on its own line
Reader type, lock type, release method and request-to-exit checked and recorded per door.
Fail-safe / fail-secure confirmed
Behaviour on power loss and on fire alarm activation tested and recorded — the check that matters most on an escape route.
Commissioning and periodic checklists
From power supplies and standby batteries to controller time-sync and event logging.
Defects with photos
A door that doesn't release on the fire alarm interface is a defect with a photo, a severity and a rectification.
Client sign-off
Handover and periodic certificates signed in the client portal, verifiable by QR.
Integration with the fire alarm certificate
Both systems at a site sit under one compliance pack and one portfolio view.
On site
A access control visit on your phone, start to finish
- Open the site. The door register is there from last time: reader, lock and release for each door.
- Door by door. Test the reader, the lock and the request-to-exit, and mark each door.
- Fire alarm release. Check each door on an escape route releases on a fire signal and on power loss.
- Power. Power supplies and standby batteries.
- Sign and send. The client signs, the certificate locks, and failed doors are repairs with a draft quote.
No signal? Everything saves on the phone and sends when you're back in range. Once it's signed, anyone can scan the QR code on the certificate to check it's genuine, and the client finds it in their portal with what's due next.
The same on every discipline
One app for the certificate, the client and the invoice.
- ✓ Locked when signed, changes make a new revision, and anyone can check it by its QR code without logging in
- ✓ A client portal with what's due, signing on screen and fault reporting
- ✓ Failed items become repairs, then a quote and an invoice, sent to Xero
- ✓ Devices on a zone plan or as-fitted drawing that prints with the certificate
- ✓ Works with no signal in a plant room or basement: it saves on the phone and sends when you're back in range
- ✓ Service reminders go out for you, to you and the client
Related guides
Fail-safe or fail-secure locks: what is the difference?
GuideWhat makes a fire or security certificate compliant?
GuidePaper certificates vs digital: what actually changes
Free tools for access control
Access control lock cable calculator
Free calculatorAccess control door power supply calculator
Free referenceFail-safe and fail-secure locks
Questions
Access Control in Kerova
Can the fire alarm interface test be recorded?
Yes — the release-on-fire-alarm check is part of the door register, and a failure is treated as a defect on the certificate.
Does it record fail-safe and fail-secure?
Yes. Each door's release method is on the register, and its behaviour on power loss and on a fire signal is tested and recorded.
Other disciplines
Fire Alarm
See the certificate →PD 6662 / BS EN 50131Intruder Alarm
See the certificate →BS 5266-1Emergency Lighting
See the certificate →BS 5306-3Fire Extinguishers
See the certificate →BS EN 62676-4CCTV
See the certificate →BS 8214Fire Doors
See the inspection report →BS EN 12101AOVs and Smoke Vents
See the certificate →IET Code of PracticePAT Testing
See the record →Every discipline is part of the same fire and security software: one account, one price for the firm.
Ready when you are
Access control certificates on your own sites, free for a month.
Start a free trial and we set your company up, or get in touch with a question.
First month free · no card · we help you set up