Guides

Practical reading for people who sign certificates.

Short, specific guides on the standards fire & security engineers work to and the admin around them. No fluff, no clause-number bluffing.

PAT testing

PAT retest intervals: how often to test each appliance

What decides each appliance's retest interval, the checks in between, and how to keep track of it.

4 min read · Read →
Fire alarm

BS 5839-1 testing intervals: weekly, monthly, six-monthly and annual

The weekly call point test, the monthly checks, six-monthly servicing and the annual test of every device: who does what, and what is recorded.

6 min read · Read →
Fire alarm

What goes on a BS 5839-1 service certificate

The system, what was tested, the battery sum, false alarms, defects and signatures: what the record needs.

5 min read · Read →
Emergency lighting

Emergency lighting test frequencies explained: monthly, annual and five-yearly

The function test, the 1 or 3 hour full-duration test, the five-yearly light check, and what the record must show.

7 min read · Read →
Certification

What makes a fire or security certificate compliant?

The parts that get certificates rejected by auditors and insurers — and the ones people forget.

7 min read · Read →
Fire extinguishers

How often should a fire extinguisher be serviced?

The monthly look-over, the yearly basic service, the 5 year extended service and the CO2 overhaul.

4 min read · Read →
Fire extinguishers

How many fire extinguishers does a building need?

Ratings for each storey, how far anyone should walk, mounting heights and choosing the type.

5 min read · Read →
Fire alarm

How many smoke detectors does a room need?

How far a detector reaches, the grid, walls and corridors, with a worked example.

5 min read · Read →
Fire alarm

How far apart can manual call points be, and how high do they go?

The 45 m and 30 m distances, the 1.4 m height and what changed in 2025.

3 min read · Read →
Fire alarm

BS 5839-1:2025: what's changed for installers

The 2025 changes that affect what you fit, sign and write down, in plain words.

4 min read · Read →
Fire alarm

Fire alarm categories: L1 to L5, M, P1 and P2 explained

What each category means, and what changed for bedrooms and stairway lobbies.

4 min read · Read →
Fire alarm

How to work out a fire alarm battery size

The Annex E formula step by step, the standby times, a worked example, and fitting and checking.

6 min read · Read →
Emergency lighting

How much light does emergency lighting need?

Lux levels for escape routes, open areas and fire equipment, and how long the light must last.

4 min read · Read →
Intruder alarm

Intruder alarm grades 1 to 4: which one do you need?

What the grades and environmental classes mean, PD 6662, notification options and police response.

6 min read · Read →
CCTV

CCTV pixel density: how many pixels do you need to identify someone?

How it is worked out, the 2025 levels, and why it is only part of the picture.

5 min read · Read →
Access control

Fail-safe or fail-secure locks: what is the difference?

Which suits an escape route, and how BS 7273-4 categories A, B and C work.

4 min read · Read →
Certification

Which certificate does each fire alarm or emergency lighting job need?

Design, installation, commissioning, acceptance, servicing and modification, and who signs each.

4 min read · Read →
Running the business

Charging late payment fees on overdue invoices (UK)

The £40, £70 or £100 fixed sum and 8% over base rate interest for business clients, with a worked example.

5 min read · Read →
Running the business

Paper certificates vs digital: what actually changes

An honest comparison for a small fire & security company: cost, time on site, disputes, and what clients notice.

6 min read · Read →

Put it into practice

The registers and readings in these guides are built into Kerova's certificates.

Try them on your own sites, free for a month.

First month free · no card · we help you set up