CCTV commissioning certificate app · BS EN 62676-4

CCTV commissioning certificate app for BS EN 62676-4: cameras, recording and what each camera is for.

Camera and recorder registers, retention and image-quality checks, and sign-off against the operational requirement — on a certificate the client can verify.

Certificate types: Design · Installation · Commissioning · Periodic Inspection & Servicing

On the certificate

What the cctv certificate records

01

Operational requirement on record

What each camera is for — monitor, detect, observe, recognise, identify — captured against the view it actually gives.

02

Recorder and retention checks

Retention period, storage health and time-sync checked on every maintenance visit.

03

Image quality per camera

Focus, field of view, lighting and obstruction results per camera, with fails promoted to defects.

04

Commissioning checklist

Cabling, power, network and export/playback tests with pass / fail / N/A.

05

Client visibility

Clients see the system's status and next service in their portal; the certificate is verifiable by QR.

06

Repairs and quotes

A camera that needs replacing becomes a repair, and goes on a draft quote the client approves in the portal.

On site

A cctv visit on your phone, start to finish

  1. Open the site. Cameras and recorders are listed from the last visit, each with what it's for.
  2. Check each view. Focus, field of view, lighting and obstruction, camera by camera.
  3. Recorder. Retention period, storage health and time sync.
  4. Fails to repairs. A camera that needs replacing becomes a repair and a quote line.
  5. Sign and send. The client signs and the certificate goes in their portal, checkable by its QR code.

No signal? Everything saves on the phone and sends when you're back in range. Once it's signed, anyone can scan the QR code on the certificate to check it's genuine, and the client finds it in their portal with what's due next.

The same on every discipline

One app for the certificate, the client and the invoice.

  • ✓ Locked when signed, changes make a new revision, and anyone can check it by its QR code without logging in
  • ✓ A client portal with what's due, signing on screen and fault reporting
  • ✓ Failed items become repairs, then a quote and an invoice, sent to Xero
  • ✓ Devices on a zone plan or as-fitted drawing that prints with the certificate
  • ✓ Works with no signal in a plant room or basement: it saves on the phone and sends when you're back in range
  • ✓ Service reminders go out for you, to you and the client
All features →

Related guides

Free tools for cctv

All free tools for engineers →

Questions

CCTV in Kerova

Does it cover data-protection requirements?

The certificate records retention and signage checks as part of the maintenance checklist. It is not a substitute for the operator's own data-protection documentation.

Can I record what each camera is meant to see?

Yes. Each camera has its purpose (monitor, detect, observe, recognise or identify) on the register, next to the result for the view it actually gives.

Ready when you are

Cctv certificates on your own sites, free for a month.

Start a free trial and we set your company up, or get in touch with a question.

First month free · no card · we help you set up