Coming next Building compliance

Dry and wet riser inspection and testing software

Not in Kerova yet. Coming to Kerova. We're building this with firms that do the work. Tell us how you do it and get early access.

Riser inspections and pressure tests recorded on the phone, outlet by outlet up the building, with the reading at each landing and anything damaged or missing turned into a quote.

What the paperwork usually involves

Dry and wet risers are inspected, tested and maintained to BS 9990. A dry riser is an empty pipe the fire service charges from the inlet at street level; a wet riser is kept full, with its own tanks and pumps, in taller buildings. The paperwork for either one covers:

  • The riser and its outlets: where the inlet is, how many landing valves there are and on which floors, and the condition of each: valves, caps and chains, straps and padlocks, the boxes and their glass, the signs.
  • The visual inspection: the more frequent visit, checking everything is there, undamaged, secure and accessible.
  • The test: for a dry riser, filling the system and holding it at the test pressure for the set time, then checking each outlet and joint for leaks; for a wet riser, the pumps, tanks and pressures as well. The pressures and durations used are written down with the result.
  • Defects and the remedial work: stolen brass, a seized valve, a box that won't open, and what was done.

The building's responsible person needs to show the fire service and the insurer it's been done, and in residential high-rises it sits alongside the fire doors, the AOVs and the emergency lighting in the same building safety records.

General terms only: we name the standards but don't quote them. Work to the current edition and your own procedures.

What Kerova already does that carries straight across

Kerova is live today for fire and security firms. These parts of it would work the same way for dry and wet risers:

  • A register, floor by floor: Kerova already keeps every item on a site on its own line with its own result: each fire door, each vent, each light. Each landing valve on each floor is the same idea, with the inlet at the bottom.
  • The same buildings, one place: Many riser buildings already have AOVs, fire doors and emergency lighting. In Kerova the client sees every certificate for the building in one portal, from every discipline.
  • Defects into quotes: A missing cap or a stolen landing valve becomes a repair with a photo and a quote, approved by the client in the portal.
  • Works in the stairwell: No signal on the 14th floor? It keeps everything on the phone and uploads later.
  • A QR check on every record: The building's responsible person and their insurer can check it's genuine and unaltered.
  • Reminders: The next inspection and the next test are worked out and reminded.

What we'd need to build: the riser and outlet register, separate dry and wet riser checks, test readings, and the pump and tank checks for wet risers. Tell us how you lay out your records now.

Early access

Tell us how you do it, and get it first.

Five minutes. We read every one, and the trades with the most firms asking get built first.

This goes straight to us at admin@kerova.co.uk. We reply within a working day, and only about early access.

Questions

Is it available now?

Not yet. Dry and wet risers are coming next, built with riser firms first through early access. The free inspection and test record is ready to print today. In the meantime, fire alarms, intruder alarms, CCTV, access control, emergency lighting, extinguishers, fire doors, AOVs and PAT testing are live today.

Does the template give the test pressure?

No. Write in the pressure and the time your test procedure uses. We don't print limits on the sheet.

What does early access mean?

You tell us how you do the job now, we show you what we've built as it's built, and you use it on your own sites before it's open to everyone. No card, and you can stop whenever you like.

What will it cost?

Kerova's plans include every discipline it has today, from £99 a month (see pricing). We'll say how dry and wet risers is priced before anyone pays for it.

Also coming next

Something else? Tell us what you'd like Kerova to do.