PAT testing · IET Code of Practice
PAT retest intervals: how often to test each appliance
Quick answer
There's no single PAT retest interval. The law asks for equipment to be kept safe but doesn't set a date; the IET Code of Practice gives suggested starting intervals that depend on the type of equipment and where and how it's used, and your own judgement moves each item's interval up or down.
The short answer
There isn't one interval for every appliance. The law asks for electrical equipment to be maintained so it's safe; it doesn't set a PAT date. The IET Code of Practice for In-service Inspection and Testing of Electrical Equipment is what most testers work to, and it gives suggested starting intervals that depend on what the equipment is and where and how it's used. Your own judgement, and what you find, then moves each item's interval up or down.
Key point: the interval belongs to each item, not the site. A kettle in a busy kitchen and a monitor that never moves can sit on the same register with different retest dates.
What decides the interval
- The type of equipment. Hand-held items (drills, hair dryers) take more knocks than movable ones (kettles, heaters), which take more than items that stay put (fridges, photocopiers) or IT equipment on a desk.
- The environment. A construction site is the hardest life an appliance gets, then industrial premises and places used by the public. Offices, shops and hotels are gentler.
- Who uses it. Equipment used by the public or by children is checked more often than equipment used by staff who report damage.
- Its class. Class I (earthed) items get an earth continuity test as well as insulation; Class II (double insulated) items rely on their insulation; leads and extension leads get a polarity check.
- What you found last time. Items that keep failing, or show damage between tests, need a shorter interval; items in good order in a gentle environment can go longer.
Check the suggested starting intervals in your copy of the current edition of the Code of Practice for each type and environment, then record the interval you've chosen against each item.
Visual checks in between
A formal visual inspection, looking at the plug, the cable and the case without test equipment, catches most faults, and it's done more often than the full combined inspection and test. Many firms ask staff to look over their own equipment before use and report damage, which is the cheapest check of all.
Keeping track
Each item needs its asset number, what it is, where it is, its class, the result of each check and reading, pass or fail, and when it's next due. A failed item should be labelled, taken out of use and listed with what's being done about it.
That's exactly what our free PAT testing log template has on it. In Kerova each item on the register has its own retest interval, from 3 months to 5 years, and the next visit to the site is worked out from the items on it.
Common questions
Is PAT testing a legal requirement?
The law requires electrical equipment at work to be maintained so it's safe. It doesn't say you must PAT test on a set date; testing at sensible intervals is how most businesses show they've done it.
Can different items on one site have different dates?
Yes, and they usually should. The interval is set for each item by its type, where it's used and what you've found.
Do new appliances need testing straight away?
A new item should be checked over before use and added to the register; many testers give it a visual check and record it, then test it at the next visit. Follow the Code of Practice and your own judgement.
This guide is general information for UK fire & security companies, not legal or engineering advice. Always work to the current edition of the relevant standard and your own competent-person judgement.
Doing it on site?Doing the PAT testing? Do it on your phone with Kerova's PAT testing app, part of its fire and security software. The register, readings and result are built into the certificate itself.
Start free trial