Fire alarm log book
System details
- Site name
- Site address
- Responsible person
- Panel make, model and where it is
- System category (for example L2, P2, M)
- Number of zones
- Servicing company and phone
- Alarm receiving centre and account number (if any)
Weekly test
Use a different manual call point each week, in turn, and write down which one. Check the sounders can be heard and, where there is one, that the alarm receiving centre got the signal. Reset the panel afterwards.
| Date and time | Call point used (zone and location) | Sounders heard? (Y/N) | Signal to ARC? (Y/N/none) | Problems found | Tested by |
|---|---|---|---|---|---|
Events: false alarms, faults and disablements
Write down every event, even a false alarm that was reset straight away. Give the cause if it's known and what was done about it.
| Date and time | Zone or device | What happened (fire, false alarm, fault, disablement) | Cause, and what was done | Signed |
|---|---|---|---|---|
Service visits
Filled in by the engineer at each visit.
| Date | Company and engineer | Visit (routine, repair, other) | Defects found, and anything agreed | Certificate ref. | Next visit due |
|---|---|---|---|---|---|